Laser Engraved Wooden Card "Everyone Needs A Little Jesus"

A friend received a card similar to this along with a mini-Jesus figurine as part of a care package. She was looking to do something similar, so we worked up a design she preferred and printed out an initial 30 of these small cards.  You can put optional scripture on the back or leave it as is.  

Using my XTool M1, I laid out a 12x12 piece of 1/8" Basswood, figured out my size, laid out the text, and then used the auto fill function which left me with 15 cards on one sheet.  I went with engrave for the letters with power at 65 and speed of 150.  The box outline I cut with power at 100 and speed of 6. 

That's it, from there press go and let it work!