Report
![[Laser cut and engrave] Laser Cut Wooden Snowflake Ornament Decoration](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/5439534f-01c7-4f19-845c-c0ab0701133b.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
3d Multi Face Table Top Snowflake
Remix
Instruction
3d Snowflake Table topper
.xcs
Application scenario
Laser processing
Machine & module
xTool S1
40WCompatibles · 13
Material used
1/8"(3mm) Basswood Plywood
4
39
Information
After seeing a design on Atomm by 'Shas' for a 3d Christmas Tree bauble, I wanted to see if the 3d Snowflake Design I had already created could be adapted - Much like my other 2 designs, I adapted this one so that it can sit on top of a Table or shelf - another Remix of the original Design.
This looks great and it worked out perfectly, suitable for Painting of adding Glue and glitter for a personalised look.
Have fun and as always, If you have any issues - let me know.
Created on a S1 40W
Cutting 100% power with 15mm/s Speed on 3mm Basswood (Good quality Basswood that did measure 3mm thickness)
Approx dimensions is 80mm by 80mm
This remix is based on
Wooden 3D snowflake
CRAFTELEEInstruction
1
Step1: Gather the Pieces
Preview
A fun Multi Face Snowflake Design ready top be painted, This looks lovely on a table, shelf or dresser.
This is a little remix of my other designs.
2
Step2: Before assembly, You may want to sand the scorch marks off or pre-paint the bauble prior to assembly - I did not do this for the Instructions.
3
Step3: Push the Main piece into the base, it should be a nice snug fit, once happy, add a little glue.
Preview
4
Step4: Place one of the 4 Snowflake Pieces and Push into the slot as per the photo, Glue in place.
Preview
5
Step5: Use another snowflake piece and again push into the slot and Glue in place
Preview
6
Step6: Once you have completed the assembly, Carefully glue the top of the piece, gluing along the touching edges.
Preview
Preview
7
Step7: Hopefully you will have a finished Snowflake Bauble. I chose not to sand or paint before assembly as this was a test to see how it all went😁
Another Remix of my original design - this time to allow for table top or shelf use.
This looks amazing.
Show me your finished designs, painted or unpainted, glittered or un-glittered.
Comments
