Report
![[Laser cut and engrave] Gold Shell Pendant Necklace with Pearls and Abalone Inlay](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/526261b3-b80f-42af-99aa-bc1d30713f26.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Gold Shell Pendant Necklace with Pearls and Abalone Inlay](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Brass shell necklace pendant, inlaid with pearls and abalone shells
InstructionBrass shell necklace pendant
.xcs
Application scenario
Laser processing
Machine & module
xTool F2 Ultra
40W, 60WCompatibles · 9
Material used
5/32"(4mm) Brass
1
47
Information
Leveraging the advantages of the F2 Ultra in deep engraving on brass, we have designed a brass shell necklace pendant. After being polished, it is adorned with pearls and abalone shells.
Instruction
1
Step1
Preview
Based on the drawings I provided, use 1.5mm brass sheet and select deep engraving in relief mode. Specific parameters can be found in the xcs document. After processing, use sandpaper to polish the brass surface. Then soak it in a deoxidizer for 30 seconds, and you will obtain a perfect brass base.
2
Step2
Preview
Preview
Preview
Selecting our preferred shell material, we chose abalone shells for their natural color and luster, which are particularly suitable for jewelry inlaying and embellishment. Once the shell inlaying is completed, semi-round pearls can be inlaid. After all materials are inlaid, the surface is cured using resin glue, and a beautiful brass shell necklace pendant is ready.
Comments
