Report
![[Laser cut and engrave] Laser Cut Green Fabric Christmas Tree Shapes for Crafting](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/24634452-e425-4746-bd99-b8b90be9106e.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Iron on appliqué for quilting projects
Instruction
Untitled
.xcs
Application scenario
Laser processing
Machine & module
xTool S1
20WMaterial used
Cotton fabric
31
Information
Christmas tree appliqué from cotton fabric an heavy fusible interface for Christmas quilt projects
Instruction
1
Step1: Cut out a piece of your cotton fabric and iron the fusible interface to it.
I was making a Christmas quilted wall hanging and thought that the use laser cut appliqué would be an added addition to take it to the next creative level. With the use of the Xtool S1 I was able to cut out the appliqué with the fusible interface and fabric at the same time.
2
Step2: Place the material into the laser and measure thickness an mark cutting area.
3
Step3: In the Xtool studio software resize and place the Christmas trees to maximize your material or for the number of trees you desire.
4
Step4: Cut the trees from the fabric. After you are done you can remove the paper backing and iron on to your quilt project. Sewing the appliqué is optional
Comments
