Report
![[Laser cut and engrave] Christmas card with ornament](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/396de85b-e77a-4284-b5ed-53229a649430.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Christmas card with ornament](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Christmas card with ornament](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/396de85b-e77a-4284-b5ed-53229a649430.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Christmas card with ornament](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/b10ef48d-ff79-4451-a4dc-3c7c78d505e9.png)
![[Laser cut and engrave] Christmas card with ornament](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/c7be112d-ba72-45fd-90b0-d3c8f698792b.jpeg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Christmas card with ornament
Lucky Prize in 2025 Christmas Contest
Instruction
Christmas card with ornament
.xcs
Application scenario
Laser processing (20min)
Machine & module
xTool M1
10WCompatibles · 9
Material used
1/8"(3mm) MDF Board
79
1138
Information
It is a gift card with its ornament that you can personalize inside with an image or a phrase, and to save you just have to place it the same and it would be ready for another Christmas!
I did this project for corporate gifts for a veterinarian, a nice way to reach their clients in these beautiful times!
***includes design in English and Spanish
Instruction
1
Step1: Desing
Preview
combine my favorite Christmas details, add the dedication and create my snowflake ornament: download a snowflake vector, create a circle and outline it, then place my snowflake inside and unite
***includes design in English and Spanish
2
Step2: engrave
Preview
with my 10 watt m1 I use 60 power and 60 speed for sharp engraving
3
Step3: cutting and decoration
Preview
Preview
Preview
I cut the MDF with a speed of 9, 2 passes and power of 100, I prefer to cut in 2 passes because it does not burn the edges of the material as much
Clean the edges of the card and the engraving with isopropyl alcohol and a towel.
use a string to tie the card ornament with a bow, then use this to hang your ornament from the tree
Comments
