Report
![[Laser cut and engrave] 2 Layer Wooden Merry Christmas Ornament](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/87f320d6-8a89-48cf-9f2b-09e0815538a5.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
2 Layer Wooden Merry Christmas Ornament
2025 Christmas Contest
Instruction
Round tree merry Christmas ornament
.xcs
Application scenario
Laser processing (15min)
Machine & module
xTool D1 Pro
20WCompatibles · 13
Material used
1/8"(3mm) Basswood Plywood
1
46
Information
This wooden Merry Christmas ornament is about 70mm x 80mm, and was made using 2 layers of painted 3mm plywood. Any laserable materials with a good contrast should work.
Instruction
1
Step1: Cut it out
Preview
Preview
Cut out both layers of the ornament. Their are two canvases one for each layer of the ornament.
2
Step2: Glue it together
Preview
Preview
Preview
You should have 2 pieces as shown in the first picture. Glue the back of the piece with the tree on it on to the face of the other piece as shown in pictures two and three.
3
Step3: Add a hanger
Preview
Preview
Now add something to hang it from I used a slightly longer then 200mm long strip of 3mm red ribbon. Tie it into a loop so that it looks like picture one. Then push one end through the ornament's hole and then loop it through the other end of the loop of ribbon as shown in picture two. Now pull it tight, and your ornament is complete.
4
Step4: Finished
Preview
Your ornament is now complete!
Comments
