Merry Grinchmas ;)

Cut and engrave your piece from 3 mm birch plywood—or any wood you have.

Apply wood glue to the thin frame.

Place the frame onto the base. Wipe off any excess glue. Temporarily insert the middle piece to make sure everything lines up perfectly, especially the holes for the tape. Then carefully remove the middle piece so it doesn’t stick before the frame glue dries.

Once the glue on the frame is dry, insert the middle piece permanently.

Insert the tape from the bottom. Use any length depending on the size of the buckle you want.

Tie the buckle, and you’re done! Now you have a stylish and funny money transfer box.