![[Laser cut and engrave,Blade cut] Laser Engraved Neon Acrylic Business Card](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/9c4187f3-b726-4ede-ad15-c8fd2a98bd84.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave,Blade cut] Laser Engraved Neon Acrylic Business Card](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave,Blade cut] Laser Engraved Neon Acrylic Business Card](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/9c4187f3-b726-4ede-ad15-c8fd2a98bd84.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave,Blade cut] Laser Engraved Neon Acrylic Business Card](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/00d35430-9a5a-452f-a766-477e047aa626.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Laser Engraved Neon Acrylic Business Card
Instruction
Information
Translucent colored acrylic material is perfect for making business cards! It brings some vitality to your business activities and makes a great impression on customers!
-------------------------------------------------
Translucent color acrylic material is very suitable for business cards! It can inject vitality into your business activities and attract the eyes of your customers!
Instruction
Step1: Material
You need to prepare some small acrylic cards, in solid colors or frosted semi-transparent ones.
Because the fluorescent green and fluorescent orange materials for this project have already been used up, I use green and frosted semi-transparent purple here to do the instructions.
You can change the material according to the effect you want. The parameters are universal.
Step2: Preparation before processing
Place the acrylic sheet on the base plate or honeycomb panel, then use Studio’s auto focus. After focusing is finished, adjust your design in the software to make sure the final processing result, and then wait for the job to complete.
You can process them one by one, or use some jigs to improve your efficiency. Processing many cards in one run is also no problem.
I provide two sets of parameters in the file. After testing, both parameters can achieve perfect processing, so you can choose according to your needs.
Step3: Click the processing button, then wait for the task to end
Oh, by the way, before processing you can choose Uni-directional or Bi-directional engraving mode.
If you want to improve processing efficiency, choose Bi-directional.
If you want to improve detail quality, choose Uni-directional.
It depends on your design requirement. In general, for vector graphics where the lines are not very dense, the processing results of these two modes are not much different. I usually choose bi-directional mode because I want higher efficiency.
If you have better processing methods, welcome to discuss with me in the comments. I also need to learn more. Thank you everyone!
