Report
![[Laser cut and engrave] Desktop Christmas Tree With Hanging Ornament](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/44dce94d-5fab-4be5-bd47-564b4f176e6f.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Desktop Christmas Tree With Hanging Ornament](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Desktop Christmas Tree With Hanging Ornament
2025 Christmas Contest
Instructiondesktop_christmas_tree
.xcs
Show 1 more
Application scenario
Laser processing
Machine & module
xTool S1
20WCompatibles · 12
Material used
1/8"(3mm) Basswood Plywood
4
30
Information
A small Christmas tree to bring the holiday spirit to every desk. It features a small hanging ornament for some extra fun.
Instruction
1
Step1: Cut the parts
Preview
Cut out the parts. The hanging ornament is quite delicate so be careful with it.
2
Step2: Glue the base
Preview
Glue the base to the tree. I used wood glue but gel superglue will also work fine.
3
Step3: Paint
Preview
Paint the model. This is an optional step. You can paint each side in different colors.
4
Step4: Tie the ornament to the tree
Preview
Use a piece of string to tie the hanging ornament to the tree. Since the ornament doesn't have large holes, use a thin string.
Fishing line, sewing string or similar will work well.
Make sure that the ornament is hanging and doesn't touch the tree on the top or bottom.
Comments
