![[Laser cut and engrave] Laser Cut Wooden Christmas Candle Holder with Snowflake Design](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/0f7672ec-2260-4704-8d19-c438f679b6ca.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Laser Cut Wooden Christmas Candle Holder with Snowflake Design
Instruction
Information
This elegant laser-cut wooden candle holder features four side panels decorated with intricate snowflake and star cutouts, creating a warm, glowing pattern when a candle or LED light is placed inside. The design slots together using interlocking tabs and a solid base panel.
Perfect for holiday décor, gift sets, or craft fairs.
Instruction
Step1
Prepare Your Canvas
each panel (4 sides + 1 base) is on individual canvases in XTool Creative Space for the F1/F2 or place all 5 panels together on one sheet if your material size allows.
Position your designs without overlap.
Step2
Cut the four decorative sides
Cut the base panel with the slot for the tabs
Check that the joints fit snugly but not tight—light sanding fixes tight tabs
Step3
Begin with the base panel flat on your table.
insert each side panel into the base slot.
Connect the sides together using the interlocking tabs.
Apply a small amount of wood glue inside the joints (optional but recommended for long-term stability).
Let dry 15–30 minutes.
Step4
Finishing (Optional)
Paint:
Spray paint or acrylic works well.
Paint before assembly for the cleanest edges, or after for a rustic look.
Stain:
Gel stains or penetrating stains both work on birch.
Wipe off excess and allow to dry fully.
Seal:
Use clear lacquer or polyurethane for protection if desired.
Step5
Add Candle
Use LED candles only for safety.
Place a tea light or LED candle inside the assembled holder and enjoy the glowing snowflake effect.
