Report
![[Laser cut and engrave,DTF Printing,Inkjet printing] Laser Cut Naughty Santa Christmas Ornament with Beer Mug](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/37fdb04b-00e0-43a8-83e1-832b02e4c7c0.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave,DTF Printing,Inkjet printing] Laser Cut Naughty Santa Christmas Ornament with Beer Mug](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave,DTF Printing,Inkjet printing] Laser Cut Naughty Santa Christmas Ornament with Beer Mug](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/37fdb04b-00e0-43a8-83e1-832b02e4c7c0.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave,DTF Printing,Inkjet printing] Laser Cut Naughty Santa Christmas Ornament with Beer Mug](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/f0763bec-1a73-4430-bf6f-07a1d165b57c.png?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave,DTF Printing,Inkjet printing] Laser Cut Naughty Santa Christmas Ornament with Beer Mug](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/9451114d-8dfd-4983-b9f1-fac347bab2d6.webp?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Laser Cut Naughty Santa's Drunken JOY Christmas Ornament with Beer Mug
Instruction
Santas Drunken Joy
.xcs
Show 1 more
Application scenario
Laser processing、DTF、Inkjet printing
Machine & module
xTool P2S
55WCompatibles · 12
Material used
1/4"(6mm) Birch Plywood
10
261
Information
This design can be a ornament or sign. It can be cut and either sublimation/M1, or dtf printed. I personally use sublimation
Instruction
1
Step1
Sand chosen wood smooth with 220 grit then cut using one of the templates provided.
Use the solid outline (backer) layer cut your blank. I have a sign sized and a ornament size.
2
Step2
Preview
Either sublimate @400f for 100sec or your chosen settings depending on the method you decide on. Enjoy!
I have other designs like this joy if your interested i can upload them as well.
Comments
