![[Laser cut and engrave] Magnetic Calendar 2026](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/d3d894bf-279c-4a14-860f-518f02f1cea2.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Magnetic Calendar 2026](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Magnetic Calendar 2026
2026 Calendar Contest
Instruction
Information
Modern calendar to stick on your refrigerator, file in English and Spanish!
If you like my design, don't forget to leave a like!
Instruction
Step1: Desing
To build the base of my calendar, I joined a circle and a rectangle, simplifying the points.
then I wrote my message and added a sun in silhouette
I drew a 5.5 x 5.5 square and that will be the printing measurement of the months of my calendar
at the end put 2026
Step2: engraved and cut
To engrave I always use 2 passes and low laser power, so that the engraving looks sharp, after engraving and cutting the piece cleanly with isopropyl alcohol.
To cut I prefer 2 passes too, so that there is not so much residue stuck to the mdf
Step3: Printing and assembly
I printed the months of my calendar, in the files I left the design in English and Spanish, one sheet is enough
trim with scissors, and then arrange and attach 2 staples, then apply double stick tape to stick to the mdf
Place the magnet of your choice, I used a printable magnetic sheet, glue it to the MDF, cut out the excess with scissors and that's it.
