Report
![[Laser cut and engrave] Christmas pin gingerbreadman](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/6b194ba0-b907-4481-b0fc-c95210360f5e.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Christmas pin gingerbreadman
Instruction
pins noel
.xcs
Application scenario
Laser processing (2min)
Machine & module
xTool S1
10WCompatibles · 12
Material used
1/8"(3mm) Basswood Plywood
1
28
Information
Small Christmas pin gingerbreadman in plywood. You can use paper au circle of craft paper to replace the bottom part to have a thinner pin.
Instruction
1
Step1
- Cut the plywood
- Glue the gingerbreadman on the front part
- Put glue support into the hole of the bottom part and glue it to the front part
- Paint & vanish as you like
Comments
