Report
![[Laser cut and engrave] Easter Nite Lights](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/36b3c7fb-c54b-4fe3-83f7-84972eac97e4?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Easter Nite Lights](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Easter Nite Lights](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/36b3c7fb-c54b-4fe3-83f7-84972eac97e4?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Easter Nite Lights](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/0275312d-602e-4044-83a8-d8299b67b26e/IMG_0003(1).jpeg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Easter Nite Lights](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/db690394-538a-471b-9e0b-57d5e178978c/IMG_0006.jpeg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Easter Nite Lights
Remix
easter_pencilholder
.xcs
Application scenario
Laser (60min)
Machine & module
xTool D1 Pro
5WCompatibles · 12
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
Vellume paper
71
956
Information
These are remixes from pencil boxes. I downloaded them and changed the sizes and cut outs. I also cut out bottoms and tops to hole the LED Lites. The light on the right is cut from 3mm oak that I recut in my shop. The other 2 are out of 3mm bass wood from amazon.
This remix is based on
https://creativecommons.org/licenses/by-nc/4.0/
https://creativecommons.org/licenses/by-nc/4.0/Comments
