Report

[Laser cut and engrave] Laser Engraved Wooden Christmas Decoration with Dogs and Tree Scene — Project made with D1 machine for Christmas.

Laser Engraved Wooden Christmas Decoration with Dogs and Tree Scene

Instruction

CHRISTMAS TREE SCENE

.xcs

Show 1 more

Application scenario

Laser processing (100min)

Machine & module

xTool D1

10W

Compatible xTool Machine

F2 Ultra UV

F2 Ultra（Single）

F2 Ultra

F1 Ultra

F1 Lite

P2S

M1 Ultra

D1 Pro 2.0

D1 Pro

Laserbox

Material used

1/2"(12mm) Pine Ponderosa Plywood

146

8548

Information

      This charming Christmas scene captures the joy of the holidays through a delicate laser engraving. Presented on a piece of warm-grained pine wood, the piece frames the action: three adorable dogs, dressed in festive sweaters, enthusiastically decorating a Christmas tree.

The presence of these companions is a reflection of our deep love for animals, whom we always keep present. Their energy and tenderness at home make Christmas even more beautiful and memorable, filling every corner with unconditional affection and that spark of happiness only they can provide. This engraving is a tribute to those loyal friends.

Instruction

Step1: Material Selection and Preparation

Preview

Select the material to engrave. In this case, pine wood was used. Clean it well and prepare it for the engraving process.

Step2: Sizing and Engraving Process

Preview

Resize the design file to fit the dimensions of your working material. For this project, the XTool D1 10W was used. Two passes were made with the configured parameters to ensure superior contrast and engraving depth, thus achieving a better finish on the wood.

IMPORTANT: The engraving settings are specific to the wood I used. To get the best result for your project, please adjust the parameters (power/speed) on your XTool machine according to the wood you have chosen and your specific machine type.

Step3: Final Details

Preview

To complete the process, the edges of the wood were softened, rounding the corners for a more tactile and aesthetic finish. The result is the final piece shown.

Comments