Report
![[Laser cut and engrave] We The People](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/113171cc-1ced-46b3-84f4-3cee737cab1b?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] We The People](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
We The People
Instruction49
.svg
Application scenario
Laser (60min)
Machine & module
xTool S1
40WMaterial used
20oz(600ml) Seafoam Tumbler kit with Handle
431
2879
Instruction
1
Step1: Prep Cup
Clean the cup with either rubbing alcohol or soap and water
2
Step2: Measure the cup
Measured the cup with the tape that was supplied with the RA2 tool. Got my perimeter and entered it into XCS. Drew a Box in the software of the size of the cup and brought svg file in and sized accordingly.
3
Step3: Choose settings for engraving
I had already done test grids on these cups, My settings for this cup was 40p, 500sp, 240lps. 1 pass.
4
Step4: Clean cup after engrave
Removed the cup and cleaned it with soap and water and a magic eraser. This cleans all of the charring if there is any.
Comments
