Report
![[Laser cut and engrave] Laser Cut Leather Pen Holder with Hand-Stitched Detailing](https://storage-us.atomm.com/resource/xart/result/539082/7e2ac534-a7e5-4dfa-9e6c-6680f6a36d58.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Laser Cut Leather Pen Holder with Hand-Stitched Detailing](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
can koozie
Instructionkoozie
.xcs
Application scenario
Laser processing (10min)
Machine & module
xTool S1
40WMaterial used
brown genuine leather
3
124
Information
can koozie to keep fingers and hand from getting cold.
Instruction
1
Step1
take a strip of whatever leather you have on hand.
wrap it around the can. that measurement will be the width of the koozie.
(width will vary with thickness of leather)
i used 5/6 oz leather for the first one i made so width was 8.6 inches.
second one i made was 4/5 oz leather and the width came out to 8.5 inches.
next step is to use a compass/divider to measure a stitch line at each end.
follow those lines to punch holes.
stitch the ends together to form snug can holder.
easy peasy.
if you want to engrave on the koozie, do it before stitching ends together.
i cut on a s1 40w. engraved on my f1 lite.
Comments
