Report
![[Laser cut and engrave] Laser Engraved Wooden Wolf Portrait Wall Art](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/4dba55bc-3cc6-474e-b3a7-2caf49e3624c.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Laser Engraved Wooden Wolf Portrait Wall Art](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Laser Engraved Wooden Wolf Portrait Wall Art](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/4dba55bc-3cc6-474e-b3a7-2caf49e3624c.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Laser Engraved Wooden Wolf Portrait Wall Art](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/ce97a821-2d6b-44e3-a58f-67520c368eb9.png?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Laser Engraved Wooden Wolf Portrait Wall Art](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/2202fb62-bf0b-47d7-b53f-7c9384383850.png?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Wolf Portrait on slate coaster - Laser Engraved
Instruction
Wolfengrave
.xcs
Application scenario
Laser processing
Machine & module
xTool F1 Ultra
20W
xTool M1 Ultra
10W, 20W
xTool P2S
55W
xTool S1
10W, 20W, 40W
xTool F1
10WCompatibles · 11
Material used
Rock
128
1210
Information
I made the wolf portrait with AI
Laser Engraved it on a slate coaster
Instruction
1
Step1: Open file
Preview
Open the file in Xtool Studio.
This was the original image I used created with AI.
2
Step2: Settings
Preview
I inverted the image (the XCS file comes with the image already inverted)
You can find invert in EDIT-ADJUSTMENTS
I adjusted the contrast and sharpness
3
Step3: Frame and start the job
Preview
Frame the wolf on your coaster, my coaster was 10x10cm.
Adjust the size if your coaster is different.
Start the job, and 4 minutes later you have your engraved coaster.
Comments
