Report
![[Laser cut and engrave] Bunny paper cut](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/45085dad-1f5f-4f42-ae92-e71f5b0e1473?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Bunny paper cut](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Bunny paper cut](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/45085dad-1f5f-4f42-ae92-e71f5b0e1473?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Bunny paper cut](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/466c804d-7d56-45f6-89b4-a5430effeceb/bunny paper cut-05.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Bunny paper cut
Instruction
bunny papercut
.xcs
Application scenario
Laser (5min)
Machine & module
xTool M1
Compatibles · 10
Material used
Corrugated Cardboard
226
1873
Information
This adorable design is perfect for all you xTool users out there and is perfect to make for Easter Décor! I used it to make a paper cut, but it could also be used with vinyl or cut from wood and acrylic
Instruction
1
Step1: Import
Import the bunny paper cut file
2
Step2: resize
Resize as needed
3
Step3: adjust settings
I found the kraft paper setting was fine, but you may need to adjust for thicker card
4
Step4: cut
Use the blade function to cut out the design, remember to have a mat in place in the machine
5
Step5: remove
Remove from the mat and carefully pick out any bits of card that may be stuck.
Comments
