Report
![[Laser cut and engrave] USS Enterprise](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/13e1f564-5b68-4f3d-ac74-52cb375c5eb6?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] USS Enterprise](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
USS Enterprise
InstructionStar Trek Enterprise
.xcs
Application scenario
Laser
Machine & module
xTool S1
40WCompatibles · 5
Material used
Oval Tags-6.5*11mm-Rose Gold
3mm MDF Board
336
2562
Instruction
1
Step1: Download the file and place your material on your work area
Preview
Set everything the way you want it and focus your laser.
2
Step2: Cut out the pieces
I used 3mm mdf if you use something else you may need to change your settings
3
Step3: Put it together.
Preview
Preview
Preview
You will need to glue the parts as they are a little loose.
Instructions see: http://www.instructables.com/id/Laser-Cut-Enterprise/
4
Step4: Paint it or leave as is.
Preview
Preview
After the glue has dried then paint it to your liking.
Comments
