Report
![[Laser cut and engrave] Hope You Like Dogs](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/b3ef4531-1ff7-4644-b4ea-0e5606550b28?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Hope You Like Dogs](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Hope You Like Dogs](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/b3ef4531-1ff7-4644-b4ea-0e5606550b28?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Hope You Like Dogs](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/9e0ae4db-94c7-49a0-afd0-7f8e80ef90ff_hope you like dogs final.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Hope You Like Dogs
Instruction
Welcome I hope you like dogs V1
.xcs
Application scenario
Laser (60min)
Machine & module
xTool P2
55WCompatibles · 9
Material used
Birch Plywood
1/8"(3mm) MDF Board
203
1906
Information
I made a door hanger for a craft show and everyone loves dogs! Those little symbols in the "O" are paw prints but they do not show up well the picture but they do in person.
Instruction
1
Step1: Make Cuts on Laser
Preview
Preview
Preview
Preview
I used 3 pieces of 12 X 24 inch birch plywood pieces so they would size correctly for the 18" mdf circle. Total cut time was less than 20 minutes.
2
Step2: Paint the Pieces and Glue together
Preview
I used three colors for this project. (Brown, Ivory and Black).
3
Step3: Add a Clear topcoat if it will be outside
Forgot to take a picture of this step.
4
Step4: Add a bow or rope for hanging
I added a bow to this project. I source my ribbon from Hobby Lobby and Amazon. A hemp cord would also work.
Comments
