AKILASER®

Report

F1Ultra SUS304 2ｍｍ Stainless Color Best

Instruction

F1Ultra 2㎜ SUS304 Stainless

.xcs

Show 1 more

Application scenario

Laser processing (150min)

Machine & module

xTool F1 Ultra

20W

Material used

SUS3042㎜Stainless

887

Information

      金属のカラー彫刻パラメーター設定は　金属の厚み/種類/含有金属の種類/気温などで確定された設定はとても難しく　相当の種類を試しました。
世界中のクリエーターの方が公開しているものを試しましたが　焼け過ぎることがほとんどでした。
数々のテストの結果　私が公開した物は　安定して必要としているカラーがでました。
スピードは速めに　パワーは弱めに　パワーとスピードのバランスが決めてです。
国により電圧が違うため　どの様に発色するかは判りませんが　必要とされる方はトライアルしてみてください。

Instruction

Step1

In the case of BlueLaser, it is likely that the color will be affected by factors such as the amount of moisture in the air, dirt inside the enclosure or lens, air pressure, and changes in the country, region, and power voltage within the building, so it is difficult to achieve the same color reproduction.
Google Translate

In the case of BlueLaser, it is likely that the color will be affected by factors such as the amount of moisture in the air, dirt inside the enclosure or lens, air pressure, and changes in the country, region, and power voltage within the building, so it is difficult to achieve the same color reproduction.
Google Translate

In the case of BlueLaser, it is likely that the color will be affected by factors such as the amount of moisture in the air, dirt inside the enclosure or lens, air pressure, and changes in the country, region, and power voltage within the building, so it is difficult to achieve the same color reproduction.
Google Translate

In the case of BlueLaser, it is likely that the color will be affected by factors such as the amount of moisture in the air, dirt inside the enclosure or lens, air pressure, and changes in the country, region, and power voltage within the building, so it is difficult to achieve the same color reproduction.
Google Translate

In the case of BlueLaser, it is likely that the color will be affected by factors such as the amount of moisture in the air, dirt inside the enclosure or lens, air pressure, and changes in the country, region, and power voltage within the building, so it is difficult to achieve the same color reproduction.
Google Translate

In the case of BlueLaser,it is likely that the color will be affected by factors such as the amountof moisture in the air,dirt inside the enclosure or lens,air pressure,and changes in the country,region,and power voltage within the building,so it is difficult to achieve the same color reproduction.

Google Translate

Comments