Report
![[Laser cut and engrave] Wooden Bowl](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/1918f9fa-08ad-4a38-b569-f0c1cdef4559?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Wooden Bowl](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Wooden Bowl](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/1918f9fa-08ad-4a38-b569-f0c1cdef4559?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Wooden Bowl](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/b213ba0b-c9a8-433a-b06f-9d4c724db0ca_Laser Bowl 4.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Wooden Bowl](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/ce9f39d3-8a68-4082-84a7-bace5ffa0979_Laser Bowl 6.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Wooden Bowl](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/12d50cab-780a-46b3-af84-d47fa205c7c9_Laser Bowl 5.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Wooden Bowl](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/25f700a9-ec0d-4356-afcc-9b99329c6d6b_Laser Bowl 2.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Wooden Bowl
Bowl Project
.xcs
Application scenario
Laser (30min)
Machine & module
xTool F1
Compatibles · 12
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
830
6375
Information
I saw this project discussed on the F1 Official Facebook group by Ian Dorosh and gave the design a try.
I made three sizes of bowls. I made a small 4" bowl (without taping) on a F1. Then made a couple larger bowls taped to prevent scorch marks at 6" and 12" on the S1.
Pretty easy to make and cut. It does take a little patience glueing them together. The results are pretty cool.
Next time, I'll engrave a design on the base of the bowl.
Comments
