Report
![[Laser cut and engrave] Wooden Moon and stars Box](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/be95391b-c47b-41e7-846d-8f571564548e?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Wooden Moon and stars Box](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Wooden Moon and stars Box](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/be95391b-c47b-41e7-846d-8f571564548e?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Wooden Moon and stars Box](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/15aad176-84fc-4ce4-9af0-c286db29558a_20240220_160714.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Wooden Moon and stars Box](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/20ff8d52-fee4-4278-8a2f-9d2b33bc9c03_20240220_160723.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Wooden Moon and stars Box](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/c17028f1-1ba1-41c4-bad7-9ff638da8b9a_20240220_160718.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Wooden Moon and stars Box](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/9a13f936-901a-40ce-aa4f-51910cc69734_20240220_160727.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Wooden Moon and stars Box
Remix
Wooden star Box
.xcs
Application scenario
Laser (12min)
Machine & module
xTool S1
20WCompatibles · 12
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
195
2487
Information
Inspired by the wooden magic box, I made this so could add a rechargeable led puck, with a small hole on the back for cable or opening with your finger.
I would suggest using sticky aluminium tape or foil on the inside to make the light reflect and bounce around much better.
This remix is based on
.png?x-oss-process=image/resize,m_fill,w_100,h_75,limit_0/interlace,1/format,webp/auto-orient,1)
Wooden Magic Box
xTool ProjectsComments
