Project made with xTool S1 machine for Laser cut and engrave.
Project made with xTool S1 machine for Laser cut and engrave.
Project made with xTool S1 machine for Laser cut and engrave.
Project made with xTool S1 machine for Laser cut and engrave.
Project made with xTool S1 machine for Laser cut and engrave.
key fob jig
key fob holder
.xcs
Application scenario
Laser
Machine & module
xTool S1
40W
Compatibles · 11
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
477
2350
Information
A jig to hold your key fob in place to engrave. There are 3 canvases in the file. Canvas 1 is for the single fob, canvas 2 is for 10 fobs and canvas 3 is the back plate for the 10-fob holder. The fobs that fit are 40mm x 65mm not including the ring.
![[Laser cut and engrave] key fob jig](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/eb89e114-b810-401a-8952-95c5ae9c7afb?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] key fob jig](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
