Report
![[Laser cut and engrave] Desk top draws organiser Week4Project](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/4b2022ff-94d2-40d0-8d9d-dd54ad91f186?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Desk top draws organiser Week4Project](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Desk top draws organiser Week4Project
InstructionDesk Draws
.xcs
Application scenario
Laser (90min)
Machine & module
xTool D1 Pro
5WCompatibles · 12
Material used
Apple Green Stainless Steel Tumbler with Handle (24oz)
Birch Plywood
545
4887
Instruction
1
Step1: Arrange components in XCS and cut
Preview
These draws have been designed so that all parts can be cut from A4 sized materiel. The red rectangles in the file are 200x300mm (A4) but these can be ignored or deleted if you are using a different size of materiel.
The components for the draws are on the green layer and should be cut 4 times to make the 4 draws.
2
Step2: Assemble draws
Preview
The draw components should be a tight fit and may require a little force to push together.
I would recommend using wood glue when assembling the enclosure to add some extra strength.
Comments
