You are Beautiful Mirror

Step 1) For this project the frame was from the shapes list of frames, i wanted something to fit the mirror and it's size. Once I placed the frame on the work area I sized it to fit the mirror better. i then added wording from the text editor and placed the 2 lines of text near the top and bottom of the frame.

Step 2) For this engraving of the mirror it will be on the back side of the mirror so everything needed to be placed in reverse this was done with the use of the reflect button. I also wanted the engraving to engrave everything all at once so the entire design was highlighted and the combine feature was used with subtract at overlap. This unites everything together and the engraving setting could be made.

Step 3) Once the laser machine was finished engraving, I cleaned the mirror on both sides with windex, I then taped off the wording and left the frame exposed and painted it with fast dry blue spray paint. Once dry I removed the tape and sprayed the wording with a gold color paint. Then it was installed back into the vanity mirror's frame and was ready to use.