Report
![[Laser cut and engrave] Ceramic Planter Pot with Grow and Thrive Script](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Ceramic Planter Pot with Grow and Thrive Script](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/8b1528ba-33aa-483f-8274-03cd9e6fce53.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Ceramic Planter Pot with Grow and Thrive Script](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/04a4d7ee-fe72-4a22-be8b-e0f69e6dacd0.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Ceramic Planter Pot with Grow, Thrive, Blossom, Shine Script
Atomm Featured
Instruction
CeramicPot_GrowThriveBloomShine
.xcs
Application scenario
Laser processing (60min)
Machine & module
xTool F1 Ultra
20WMaterial used
Ceramic Pot - 1.5"W x 1.5"H
20
454
Information
So, this began as a settings test and ended as a useable pot with a shadow-like effect.
Instruction
1
Step1: Prep Material
Preview
Preview
Preview
Clean the pot by wiping with rubbing alcohol or denatured alcohol on the engraving surfaces. Spray with paint (I used Ceramark black laser marking spray - one coat) and allow to dry (approx 20 minutes).
2
Step2: Design
Preview
Preview
Create your design and plan settings. This began as a settings test on my pot and I started with the xTool ceramic coaster settings, but didn't like the resulting color so I changed the settings. Settings for both are included, but if you want black marking on white ceramic I highly recommend the BL settings included in this tutorial.
3
Step3: Engrave and Clean
Engrave object and then clean. Ceramark spray comes off easily by running under water and wiping with a towel. Done ;)
Comments
