Report
![[Laser cut and engrave] Engraved ceramic coasters](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/74968410-e4bf-4556-a8cd-245e32fafb0d?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Engraved ceramic coasters](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Engraved ceramic coasters
Instructioncowboys coasters
.xcs
Application scenario
Laser (70min)
Machine & module
xTool M1
10WCompatibles · 10
Material used
Gold Stainless Steel Spinner Necklace
99
1786
Information
I bought pretty marble looking ceramic coasters on Amazon, it didn’t show up well so I did some research and used spray paint so the design would show up well.
Instruction
1
Step1: Laid all my coasters out and sprayed paint them with silver metallic paint, once first coat is fully dry, do a second coat
Preview
2
Step2: After 2 coats are done and fully dry, place in machine, I did power at 90% and speed at 50%
3
Step3: I used any basic clear coat sealant to keep the spray paint in place and looking pretty
Comments
