ScoobyDoo

Report

[Laser cut and engrave] Interchangeable Seasons Sign — Project made with S1 machine for Laser cut and engrave.

Interchangeable Seasons Sign

Instruction

interchangeableSeasonsSign

.xcs

Application scenario

Laser processing

Machine & module

xTool S1

10W

Compatible xTool Machine

F2 Ultra UV

F2 Ultra（Single）

F2 Ultra

F1 Ultra

F1 Lite

P2S

M1 Ultra

D1 Pro 2.0

D1 Pro

Laserbox

Material used

1/8"(3mm) Birch Plywood

1366

Information

      We believe that every season should be enjoyed as they all bring their own qualities.

I actually drew these images onto paper and scanned them, trying to have the same house and tree in different parts of the year.
I'm no Bob Ross but I like the slight changes.

Instruction

Step1: Cut and engrave

Preview

The intercgangeable signs are 100mm square and the cutout which will hold these is 101mm square so it is a nice snug fit.

In the top right of the interchangeable seasons there's a small triangle, this is where you stick your finger to move it for replacing.

Step2: Optional: Paint and stain

I like to paint the backing area (the one where the sides are attached to) so that it really pops out. You can see the result in the images.

In addition, I want the border to be different than the interchangeable parts as well - contrast is always a good idea. Here I stained the borde and the side supports a light oak color.

Step3: Assemble

Preview

If you did paint the backing piece, please wait for it to dry before glueing.

Then apply glue to the back of the border piece (the one with “Welcome” on it and stick this to the backing piece and clamp. Remove and excess glue with a damp cloth before it sets.

Once this has dried, glue the two side pieces onto this piece.