Report
![[Laser cut and engrave] Valentine standalone](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/cecbd9aa-4019-48eb-9359-a7b6de6396ea?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Valentine standalone](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Valentine standalone](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/cecbd9aa-4019-48eb-9359-a7b6de6396ea?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Valentine standalone](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/d6632d05-77e2-4000-ac12-a0b32a858971_valentine3.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Valentine standalone
Instruction
valentine2
.xcs
Application scenario
Laser
Machine & module
xTool D1 Pro
10WMaterial used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
Transparent Acrylic
70
1229
Information
A standalone valentine to be given to someone or to use as a decoration.
Instruction
1
Step1: Make your design in xcs then use the outline tab to make an outline of your design elements. Now remove the elements and set the outlines to score.
Preview
I did this to make placement of everything easier. Then cut out the heart.
2
Step2: Open canvas 2
Preview
Open canvas 2 and cut everything out
3
Step3: Open canvas 3
Preview
Engrave then cut all of your pieces.
4
Step4: Paint
Preview
Paint and glue and you're done. The rose came from the shapes tab. The cupid came from https://www.vecteezy.com/free-vector/eros
Comments
