Report
![[Laser cut and engrave] THE FAB FOUR](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] THE FAB FOUR](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/53c70107-31f7-4c98-a75b-87a1b08151ab.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] THE FAB FOUR](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/556e0ec9-3388-4333-8f9d-ecd97a3f66e5.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] THE FAB FOUR](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/e8ac918e-3d6c-4e22-93c1-c3afaf9c7031.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
THE FAB FOUR
Instruction
Beatles
.xcs
Show 3 more
Application scenario
Laser processing (20min)
Machine & module
xTool P2
55W
xTool D1
10WCompatibles · 8
Material used
1/8"(3mm) Black MDF Board
173
1273
Information
Here's a fun project for those that like The Beatles.
The illustrations are for 2 layers on a guitar stand but I have included templates for a single layer stand and the option to remove the stand and just have a backing.
The 2 layer option can be viewed from either side.
Instruction
1
Step1: Cut out the pieces
Preview
Select one of the options
Cut out the pieces and glue them together.
My base pieces were of a tight fit and didn't require any glue.
Don't forget to change the base slots to suit your laser and materials. (Kerf)
Use masking tape on your material to get a clean finish.
Comments
