Report

[Laser cut and engrave] Small Display Easel — Project made with xTool F1 machine for Laser cut and engrave.

Small Display Easel

Instruction

Easle - Fancy

.xcs

Show 2 more

Application scenario

Laser (5min)

Machine & module

xTool F1

10W

Compatible xTool Machine

10W, 20W

F2 Ultra UV

15W

80W

F2 Ultra

40W

F1 Ultra

20W

5W, 10W

5W, 10W, 20W

D1 Pro

5W, 10W, 20W, 40W

55W

10W

10W, 20W, 40W

M1 Ultra

10W, 20W

P2S

55W

Material used

1/8"(3mm) Basswood Plywood

3mm Basswood Plywood

519

4697

Information

      I've created several white tile engravings and slate coaster engravings that deserved to be displayed properly. This easy to create easel allows these items (and others) to be displayed. Using an F1, the slide extension is needed.

display easel

easel

Instruction

Step1: Select your easel type and size.

Preview

I've included two types of easels in a couple sizes. I prefer the “fancy” easel, as tiles and coasters fit into it better. The “small fancy” easel is the right size to display white tiles.

Step2: Adjust the size (height) if needed.

Preview

To make a taller or shorter easel, adjust the height of both portions of the easel. You'll also need to adjust the interlocking “cut” on each piece. Change the length of this cut to 50% of your new height. Be sure to unlock the dimensions padlock, as you want the width of this cut to remain the same. This is the thickness of your wood.

Step3: Cut your easel.

Preview

Cut your easel. I use the default reference settings. You may get some scorching, but I paint the easels.

Step4: Assemble and paint.

Preview

Once cut, slide the two pieces together and place onto the base. You can glue the pieces together, if you wish. I also make a quick paint job using spray paint.

Comments