Project made with xTool S1 machine for Laser cut and engrave.
Project made with xTool S1 machine for Laser cut and engrave.
Box with divider
box with divider
.xcs
Application scenario
Laser (15min)
Machine & module
xTool S1
40W
Compatibles · 12
Material used
1/8"(3mm) Maple Plywood
272
1992
Information
A 12×5.5×2 box with a divider. Made with Maker Case. MAKE SHURE SIZES BEFOR YOU MAKE AS IF BED SIZE IS SMALLER, IT WILL SRINK.
https://en.makercase.com/#/
![[Laser cut and engrave] Box with divider](https://storage-us.atomm.com/resource/xart/result/42778/fb156d9d-ccdd-411f-8e68-f31607c07ff6.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Box with divider](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
