.jpg?x-oss-process=image/resize,m_fill,w_240,h_240,limit_0/interlace,1/format,webp/auto-orient,1)
Report
![[Laser cut and engrave] Spring Flower Wreath](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/09d69478-d4f4-4132-ba38-c9b68f447879?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Spring Flower Wreath
Top Creative in Carve the Spring Workshop
Instruction
SpringWreath
.xcs
Application scenario
Laser processing (120min)
Machine & module
xTool M1
10WCompatibles · 13
Material used
1/8"(3mm) Basswood Plywood
47
884
Information
Handcrafted Flower Wreath Decoration with Sunflowers and Butterflies
Instruction
1
Step1: Cut all the pieces
Preview
Put the eva foam into the M1 or the basswood for the base.
BE CAREFULL: if you have the air assist use the tape to fix the eva foam to the plate.
2
Step2: Paste each Piece
Preview
Preview
Preview
7 More images
Sunflower:
- Center use the hot glue to fold in a half the strips
- Petals use the hot glue for the base of each petals, then paste all the petals toghether and then add the bottom
- Then paste the center to the petals part
Roses:
- Add the hotglue to the bottom of the strip, then roll the strip.
- Once is pasted, gave the right shape to the petals with the hands.
Butterflies:
- Put a little point of hot glue on the central part of the top piece then paste the piece together.
3
Step3: Choose the best position for each piece
Preview
Try if all pieces are fitting well.
4
Step4: Paste & Enjoy
Preview
Paste all the pasted pieces with some hot glue and ENJOY!
Comments
