![[Laser cut and engrave] Wooden tray with God is our refuge and strength engraving](https://storage-us.atomm.com/resource/xart/result/218859/a700b412-12c4-4627-8142-d2c1575bb9d1.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Wooden tray with God is our refuge and strength engraving](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Wooden tray with God is our refuge and strength engraving](https://storage-us.atomm.com/resource/xart/result/218859/a700b412-12c4-4627-8142-d2c1575bb9d1.png?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Wooden tray with God is our refuge and strength engraving](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/493028e4-279c-475e-b72e-dc3bfee3712b.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Wooden tray with God is our refuge and strength engraving
Instruction
Information
Hobby Lobby Acacia Wood tray with custom engraving.
Instruction
Step1
Place your material on the honeycomb. I placed this tray vertically, so that when I engraved it, the laser was going across the wood grain.
***TIP when engraving place the material so the grain is opposite the direction of travel of the laser- additionally, make sure air assist is off to get the cleanest engraving.
Step2
Measure the material and mark the working area. For trays I used the inside edge when marking and make the image slightly smaller than the working area.
Step3
Load the file and make adjustments as needed. Again- make sure your image is running across the grain.
Step4
Run the file- These setting produced a great result- 2 passes to make sure the engraving goes deeper and produces a nice contrast.
Step5
Remove and clean with some alcohol- running 2 passes may cause some build up that will need cleaned up. Use this nice sized tray on nightstand or coffee table.
