Tobias

Report

[Laser cut and engrave] Happy Easter Money Card/Holder | Bunny & Egg cutouts — Project made with xTool M1 Ultra machine for Laser cut and engrave.

Happy Easter Money Card/Holder | Bunny & Egg cutouts

Instruction

MoneyCardForEastern

.xcs

Application scenario

Laser processing (15min)

Machine & module

xTool M1 Ultra

20W

Compatibles · 10

Material used

Poplar Plywood

312

1949

Information

      Create your own money card or money holder for your easter gift - three different motives to choose from or align.

Instruction

Step1: XCS file

Preview

Open the “.xcs” file in xTool Creative Space. There is only one workspace which contains all three designs and a backplate.

Step2: Laser cut

Preview

2 More images

Place your material in your device and adjust your cutting settings based on the material and device used.

For my 20W M1 Ultra in combination with 4mm poplar plywood, I used a power setting of 85 and a speed of 5 for cutting.
And a power setting of 70 and speed of 270 for engraving the outlines.

Material

4mm Poplar plywood [Hornbach.de, Amazon.de*]

Step3: Score

Preview

For a cleaner look and shaper text you might always want to add a scoring at the outer layer. This will make your outlines pop!

For my 20W M1 Ultra in combination with 4mm poplar plywood, I used a scoring power setting of 85 and a speed of 200.

Step4: Preparation

Preview

Place some money in between the foreground and backplate. Folding it in halfs to make two colored designs.

As a bonus, the cutout bunny can be used as an additional design for eastern.

All links with an asterisk (*) are so-called affiliate links.
I participate in the Amazon Affiliate Partner Program, which allows a small commission on purchases made if you follow the links - no additional costs are involved for you!

Comments