Report
![[Laser cut and engrave] Baby It's Cold Outside Door Round](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/ac960897-4b38-4cdb-bfc9-5768ee88e072_Baby Its Cold Outside.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Baby It's Cold Outside Door Round
Instruction
0 Holes for large door round
.xcs
Show 1 more
Application scenario
Laser (90min)
Machine & module
xTool P2
55WCompatibles · 9
Material used
Paint
Starbond THICK glue
Rust-oleum 2X Gloss Clear
Ribbon and Bow (Optional)
Birch Plywood
1/8"(3mm) MDF Board
3mm MDF Board
Birch Plywood 1/4"
51
868
Information
I made a 24" door round for my front door for Christmas. When I realized how quick it was to cut, paint, and assemble I made another one for my son for a Christmas present. Total time was a about 1.5 hours. See other notes in the xcs files I have attached.
Instruction
1
Step1: Cut Holes for Bow & Hanger in MDF Door Round (Open Plane)
Preview
30 Second cut time!
2
Step2: Cut Snowflakes and Words (Slats Flat on Honeycomb)
Preview
24 Minute cut time (used 2 12 X 20) Birch plywood from Home Depot
3
Step3: Paint, Clear Coat, Glue, and add Hanger & Bow
Preview
Enjoy! This project is quick and turns out beautiful!
Comments
