.png?x-oss-process=image/resize,m_fill,w_240,h_240,limit_0/interlace,1/format,webp/auto-orient,1)
Report
![[Laser cut and engrave] Santa Letter Envelope](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/45409b9a-fbf5-4f24-9990-7c67786594e9_Snapchat-1084428578.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Santa Letter Envelope](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Santa Letter Envelope](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/45409b9a-fbf5-4f24-9990-7c67786594e9_Snapchat-1084428578.png?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Santa Letter Envelope](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/454d82af-41e2-444a-b7c1-204385717b32_Screenshot 2023-12-20 013217.png?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Santa Letter Envelope](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/ef570ef8-6df8-455b-a77f-59b6597a31f2_Snapchat-18340035.png?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Santa Letter Envelope](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/abfe3e0c-baaf-413e-9f78-3dc8cab91021_Snapchat-2129197934.png?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Santa Letter Envelope
Instruction
santa letter by FoiledDuck
.xcs
Application scenario
Laser (45min)
Machine & module
xTool S1
20WCompatibles · 13
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
197
1645
Information
This design is a perfect keepsake for your little family members.
Instruction
1
Step1: Download file
Preview
Please download and open file to XCS
2
Step2: Add wood
Preview
Add your wood to your machine
Make sure you find the distance and you mark your work area for this project
3
Step3: Settings
Preview
Preview
These are the settings i usually use, please be sure to run a material test and choose the settings that best fit you.
4
Step4: Change the name
Preview
Be sure to change the name that is in the purple layer
you can also take out the magnet holes if you plan on not using them
5
Step5: time to cut
Preview
After you have set the settings to the right settings it is time to cut
6
Step6: Glue time
Preview
this step is optional if you did not keep the magnet holes
take your 3x3mm magnets and glue and place magnets in the holes so they click together.
Comments
