Report
![[Laser cut and engrave] Miniature wooden doors and windows with ruler for scale](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/c3e20ccd-29f6-4f3f-8972-a888ed354cae?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Model Railroad Building parts
Instruction
3panedoorwithflange
.xcs
Show 2 more
Application scenario
Laser processing (90min)
Machine & module
xTool S1
20WMaterial used
3mm Poplar
38
515
Instruction
1
Step1: HO Scale Windows and Doors
There is not much to describe. This is a work in progress. I'll use the laser to construct the other parts of the building.
I first did a hand drawing to get the proportions correct, then drew it in the XCS software. I then used the XCS to adjust the size of the finished product.
Each piece will be painted with a thinned coating of shellac then painted with acrylic paint.
Settings for each of the doors and windows are similar.
The flange around the outside of each piece is used to mount the door or window into the hole cut into the building wall.
Comments
