.jpg?x-oss-process=image/resize,m_fill,w_240,h_240,limit_0/interlace,1/format,webp/auto-orient,1)
Report
![[Laser cut and engrave] Wooden cross decoration on hill design](https://image-res.atomm.com/resource/xart/result/27175/654538f2-c15b-41a5-a7bd-8cfcd4b8af60.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Wooden cross decoration on hill design](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Wooden cross decoration on hill design](https://image-res.atomm.com/resource/xart/result/27175/654538f2-c15b-41a5-a7bd-8cfcd4b8af60.png?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Wooden cross decoration on hill design](https://image-res.atomm.com/resource/xtool/community/attachment/xtool-community/8de10e7b-8413-48ad-ae93-76328ba22b44.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Wooden cross decoration on hill design](https://image-res.atomm.com/resource/xtool/community/attachment/xtool-community/e46fe6dd-1ba6-427a-a6c6-28b13a46c8e0.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Wooden cross decoration on hill design
Instruction
Crossonahill
.xcs
Application scenario
Laser processing (5min)
Machine & module
xTool M1 Ultra
10WCompatible xTool Machine
M2
10W, 20WF2 Ultra UV
5WF2
15WP3
80WF2 Ultra
40WF1 Ultra
20WM1
5W, 10WD1
5W, 10W, 20WD1 Pro
5W, 10W, 20W, 40WP2
55WF1
10WS1
10W, 20W, 40WM1 Ultra
20WP2S
55WMaterial used
1/8"(3mm) Basswood Plywood
9
1080
Information
This image was created by AI for another project i was trying, but i cropped the other section as i liked this hill design just as it is.
I used 3mm Plywood for this project on a M1 Ultra 10w with air assist.
You could use the design for a magnet or add it onto another design of your choosing! :)
Instruction
1
Step1
Place a piece of 3mm Plywood onto your machines engraving area (Or whichever size piece you are using).
2
Step2
Measure size of desired cutout and adjust to fit in Xtool.
3
Step3
Use provided settings or choose your custom settings.
4
Step4
Select framing and check your laser is going to work in the correct location.
5
Step5
Click process, then start and push whichever button activates your laser.
6
Step6
Your all done! Congrats.
Comments
Remixes
License
This work contains AI-generated content.
You may also like
Faith-Inspired Wood Cross Ornament – Love, Hope, Peace, Faith
64
450
Wooden Cross with bible books
44
147
Holy Week Cross Multilayer Decoration
66
309
The Lord Prayer Cross
290
1689
Celtic Wooden cross - holy/Easter - Personalised
8
69
Wooden cross with pink rose decoration
.jpg?x-oss-process=image/resize,m_fill,w_240,h_240,limit_0/interlace,1/format,webp/auto-orient,1)
25
141
Quilt Pattern Cross
20
106
2layer Jesus Cross
71
425
3D Christian standing cross laser cut. Wooden decorated cross stand. Wood layered cross
38
218
$2.39
$2.39
$5.98
Credits239
Floral Christian Cross Laser Cut
15
Wooden easter cross decoration
24
89
Laser Cut Wooden Cross with John 3:16 Engraving on Stand
4
14
Wooden decorative candle with cross and rose design
67
247
Emboss cross on the rock on brass coin with F1 Ultra
61
460
Laser Cut Wooden Cross with Jesus the Reason for the Season Text
9
19
Decorative wooden cross with leaves and flowers
6
54
Laser Cut Wooden Religious Cross and Jesus Figure Set
2
30
Baptism cross
47
308