Report
![[Laser cut and engrave] Santa and his helper @ChristmasCreations](https://image-res.xtool.com/resource/xtool%2Fcommunity%2Fmaking%2Fe3ea1c38-be92-4961-b0bc-e1654e5ace64%2F20231217_160150.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Santa and his helper @ChristmasCreations](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Santa and his helper @ChristmasCreations
Santa elf house
.xcs
Application scenario
Laser (120min)
Machine & module
xTool P2
Compatibles · 12
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
235
1774
Information
Started with the Santa and attached the pole and signs. Then attached the bench and the Elf and did the outline.
Inserted an image of the house , removed the background + the pieces of the windows. I also made some holes with the wand in the tree and bushes. I then did an outline of the house.
Made a rectangle, to set the 2 pieces on and painted the house , Santa and Elf.
Once all done i colored it.
I put some lights behind the house and stuck it with tape.
Comments
