Report
![[Laser cut and engrave] Wooden sled on snow representing winter holiday season](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/e91a18b6-8cf4-4889-818e-2fcdc58d3032?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Wooden sled on snow representing winter holiday season](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Miniature Wooden sled on snow
Instructiontoboggan
.xcs
Application scenario
Laser processing (17min)
Machine & module
xTool S1
20WMaterial used
birch
glue
ropes
13
427
Information
Nothing but the real thing just really really small.
Instruction
1
Step1
Preview
Preview
Preview
Preview
- This project is making a toboggan or sled
- This starts with a sized rectangle and is set
- With the kerf pattern for wood bending in place the front rolls up
- Side posts are created along with slats for the floor of the sled.
- With all adjustments to the settings the project is sent to be processed.
- After processing is complete the front of the new cut floor is bent up to meet the 2 upright posts. these are all glued in place.
- With this ready the slats are then glued to the floor spaced out to be realistic.
- Then a rope is added for the real effect,
- Now it is time to have some joy in the deep snow.
Comments
