Report
![[Laser cut and engrave] Miniature Rotating Windmill (Pen Holder)](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/20a39501-1b9b-49bc-8198-194a5d5d9438?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Miniature Rotating Windmill (Pen Holder)](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
![[Laser cut and engrave] Miniature Rotating Windmill (Pen Holder)](/_nuxt/video_icon.B5w3Xr8w.png){kind=icon}
Miniature Rotating Windmill (Pen Holder)
InstructionWindMillFinal
.xcs
Application scenario
Laser processing
Machine & module
xTool P2S
55WCompatibles · 11
Material used
1/8"(3mm) Basswood Plywood
191
1643
Information
A Cute Miniature Windmill Pen Holder. The current Windmill wing size requires a running fan 15 inches away facing right at the windmill. You can change the wing size which will allow you to put your fan at farther distance.
Instruction
1
Step1: Prepare the Cute Pieces
Preview
Preview
Simply Cut the pieces from Canvas 1 and Canvas 2
You will have
1 x Base Building
1 x Base Stand
1 x Wings
3 x 0.725" Round Circles
2 x 0.75" Round Circles
2
Step2
Preview
With Hinges it becomes easy to fold the building. Simply Fold and Glue the open edges to create a building like shape
3
Step3
Preview
Preview
Now on the scored circle - start glueing the circles in this order
1 x 0.725" Circle
1 x 0.75" Circle
1 x 0.725" Circle
1 x 0.725" Circle
Insert the Wings
Close it off with
1 x 0.75" Circle
You can do this any way you like. This is to make sure there is enough room for the wings to rotate but at the same time it doesn't hit the building or fall off from the front
4
Step4: Ready
Preview
Apply Glue at the bottom of the building and place it on the Base Stand
Comments
