Report
![[Laser cut and engrave] Miniature model of a green and black garage](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/baba33c5-2a54-46ce-b018-574cc7762a81?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Miniature model of a green and black garage](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Miniature model of a green and black garage
Instructiongarage
.xcs
Application scenario
Laser processing (45min)
Machine & module
xTool S1
20WMaterial used
MDF
Glue
Birch
70
988
Information
Small but mighty 2 car garage is way cheap if you build it with an S1
Instruction
1
Step1
Preview
Preview
Preview
- With this project the roof was designed first, pyramid style with 4 pieces.
- Each piece received shingles that were engraved.
- This was completed by making a mask for each piece.
- The next parts were the 4 walls, these walls were scored to duplicate siding.
- Each piece was set to be scored.
- The front a section was removed for the door and trim.
- The door was made from a different color material and it too was scored but with window cut outs.
- Once everything was designed it was all adjusted settings wise and it was sent to be processed.
- When finished the garage was glued together starting with the roof first.
- Then all the walls were glued, when the glue dried it was complete.
Comments
