Report
![[Laser cut and engrave] Christmas Nativity Building](https://image-res.xtool.com/resource/xtool%2Fcommunity%2Fmaking%2Fe7171cb7-6a07-4b46-ada0-a5e48242c345%2FIMG_6627.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Christmas Nativity Building](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Christmas Nativity Building
Nativity Building
.xcs
Application scenario
Laser (150min)
Machine & module
xTool D1 Pro
20WCompatibles · 12
Material used
1/8"(3mm) Basswood Plywood
1/4" Basswood Plywood
1/8" Basswood Plywood
0.020" Wooden Business Card
171
1556
Information
My wife and I love Christmas. I had made her a Nativity scene many years ago (pre laser) and it was showing it's age and I thought the laser could do a cleaner and better job. I was right!
The addition of fairy lights and the tiny lanterns really sets the whole scene off.
When I envisioned the lanterns I thought "can the laser cut something so thin and so small?". Well the proof is in the part. I was blown away!
Comments
