Carteles cumple mes

To make this design we have to follow these steps: 

• We insert a 100 mm circle.
• We insert a 64 mm circle and make a copy. We placed those circles on the top on both sides, simulating the bear's ears. When we have it in the place we want, we select all the shapes and click on combine and join. 
• We make 11 copies and we will hit it to cut.
• In each one we are going to put the text we want, in this way we will adapt the size of the text to the space we will have. 
• We choose the font that we like the most, I have used "Bambino". 
• If we want we can leave the text inside the shapes and select it to mark, in this way we can paste the text exactly in the place we want (that is free choice. in this case I did not do it). 
• We take all the text and place it on another sheet and select to cut (I put it on another sheet because I used two different woods and it is easier for me to place it like this).
• You can cut twelve shapes and use one for each month or cut 6 and do it on both sides (that's what I did). 

We turn on the Xtool, place the material we are going to work with, in this case 3 mm MDF board, adjust the height of the laser, check the parameters of the shapes and hit start. We let the machine make the cuts. If you have an air assistant, I recommend that you use it to make the cuts cleaner. 

We take out the shapes, insert the 3 mm balsa wood board, adjust the height of the laser, check the parameters of the text (to cut) and hit start. 

Let the machine do its job. 

Once we have all the pieces we are going to paste the text into each of the shapes. If we have made 12 cuts, we will stick each month on one of them. If we have made 6 cuts, we will glue one month in front and another month in the back. 

If you want, you can paint the text in some color. I didn't paint it because I like the contrast that the MDF makes with the lighter tone of the other wood. 

How beautiful the posters have been! I'm sure they look super cool in your baby's photos.