Report
![[Laser cut and engrave] Decorative frame with playful cat silhouettes](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/6e0e2fbb-4fac-48f2-a45e-4ff03eab7918?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Decorative frame with playful cat silhouettes](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Decorative frame with playful cat silhouettes](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/6e0e2fbb-4fac-48f2-a45e-4ff03eab7918?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Decorative frame with playful cat silhouettes](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/239c968d-163e-45d7-b425-aae36530a8b3.png?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Decorative frame with playful cat silhouettes](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/65b9781e-1587-4d3a-9a98-2c751e01b435?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Decorative acrylic door corner frame with playful cat silhouettes
Instruction
DoorFramePlayingCats
.xcs
Show 1 more
Application scenario
Laser processing
Machine & module
xTool D1 Pro
20WCompatibles · 15
Accessories
xTool D1 Pro/D1 Air Assist Set
xTool Honeycomb Working Panel Set for D1 Pro/D1
Material used
1/8"(3mm) Black Acrylic
465
3096
Information
My young girl inspired this acrylic corner frame. Could be cut from wood too.
Instruction
1
Step1: Setup
Preview
Open xcs software and import xcs or svg file. Check the setting to make sure that they work with you laser machine. I like to do a faster cut on acrylic and two passes with air assist for a cleaner cut that is not melted. Size can be changed to bigger of smaller. Lay acrylic on honeycomb and adjust laser accordingly.
2
Step2: Cutting
Preview
Cut the file. I like to keep the backing paper on till after cutting. Pull of backing paper and mount on the door corner.
Comments
