Report
![[Laser cut and engrave] Angry Mickey Mouse wooden earrings](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/172bb60d-01ae-418e-80d8-9d895506de43?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Angry Mickey Mouse Stud Earrings
Instruction
Mickeymad
.xcs
Application scenario
Laser processing
Machine & module
xTool F1
2W, 10WCompatible xTool Machine
M2
10W, 20WF2 Ultra UV
5WF2
15WP3
80WF2 Ultra
40WF1 Ultra
20WM1
5W, 10WD1
5W, 10W, 20WD1 Pro
5W, 10W, 20W, 40WP2
55WS1
10W, 20W, 40WM1 Ultra
10W, 20WP2S
55WMaterial used
1/8"(3mm) Basswood Plywood
32
975
Instruction
1
Step1: Cut the design and paint it
Preview
Upload the file to XCS and cut it. For best results use masking tape if cutting on the F1 as it simplifies the painting process due to no burn marks. I recommend using acrylic painting pens as the tips are very thin and simplify painting smaller designs.
2
Step2: Apply the stud blank with glue
Preview
Apply a generous amount of superglue to the back of the previously cut earrings and add the stud blanks. Apply some pressure to assure proper adhesion. Set aside to fully cure.
Comments
