HomeLaser&Cut ProjectsJewelry & AccessoryEarring
tadejss
tadejss
Report
[Laser cut and engrave] Wooden cupcake decorations with pink frosting
Project made with F1 machine for Laser cut and engrave.

Cupcake Kawaii Stud Earrings

Instruction
kawaiicupcake.xcs
kawaiicupcake
.xcs
Application scenario
Laser processing
Machine & module
xTool F1
2W, 10W
Compatible xTool Machine
P3
F2
F2 Ultra UV
F2 Ultra（Single）
F2 Ultra
F1 Ultra
F1 Lite
S1
P2S
P2
M1 Ultra
M1
D1 Pro 2.0
D1 Pro
D1
Laserbox
M2
Material used
1/8"(3mm) Basswood Plywood
gift
94
1222

Information

      Cupcake Kawaii Stud Earrings
#Earrings#
Stud Earrings
Kawaii
Cute
Jewelry
Food
Cupcake

Instruction

1

Step1: Cut the design and paint it

Cupcake Kawaii Stud Earrings instruction: step 1 - Cut the design and paint it
Preview

Upload the file to XCS and cut it. For best results use masking tape if cutting on the F1 as it simplifies the painting process due to no burn marks. I recommend using acrylic painting pens as the tips are very thin and simplify painting smaller designs.

2

Step2: Apply the stud blank with glue

Cupcake Kawaii Stud Earrings instruction: step 2 - Apply the stud blank with glue
Preview

Apply a generous amount of superglue to the back of the previously cut earrings and add the stud blanks. Apply some pressure to assure proper adhesion. Set aside to fully cure.

Comments

Remixes

License

CC BY-NC-SA